Transonic Investigation Of Aerodynamic Characteristics Of A Swept Wing Fighter Airplane Model With Leading Edge Droop In Combination With Outboard Chord Extensions And Notches PDF Download

An investigation of the effects of several wing leading-edge modifications on the aerodynamic characteristics of a 45 degree swept-wing fighter-airplane model has been conducted in the Langley 16-foot transonic tunnel at low and high lifting conditions at Mach numbers from 0.85 to 1.03. The investigation included the determination of the effect on longitudinal stability and performance characteristics of wing leading-edge and chord-extension droops of 6 and 20 degrees, chord-extension overhangs of 0.075c and 0.15c (where c is the wing chord), leading-edge notches cut out at the inboard end of the 0.075c chord-extension to depths of 0.075c and 0.125c, and indentation of the model fuselage to conform partially to the supersonic area rule for a Mach number of 1.20. Lift, drag, and pitching-moment data were obtained for configurations with the tail on and off. Comparisons of data obtained from the present model with data from a configuration with leading-edge slats are included.