Static Aerodynamic Characteristics Of Three Rocket Vehicle Configurations At Mach Numbers From 180 To 463 Including Some Effects Of Fin Size Fin Cant And Auxiliary Rocket Motors PDF Download

An investigation was conducted in the Langley Unitary Plan wind tunnel to determine the effects of fin cant and size on the static aerodynamic characteristics of a 0.081-scale model of a three-stage and a two-stage Trailblazer II configuration. Tests were performed at Mach numbers from 1.47 to 4.63 and at a Reynolds number per foot of 3.0 x 10 to the 6th power. he angleof-attack range varied from approximately -5 to 5 degrees and angle of sideslip varied from approximately -4 to 4 degrees. All first-stage fins tested gave adequate static stability when the center-of-gravity travel of the flight model was taken into account. The presence of the auxiliary rocket motors in the lateral plane decreased the effectiveness of the fins in the pitch plane at the lower Mach number and increased the fin effectiveness at the higher Mach numbers. Removal of the auxiliary rocket motors from the first stage of the two-stage configuration reduced the axial force about 25% at the low Mach numbers and about 15% at the high Mach numbers. (Author).