Serviceability Rating Of The Texas Highway System For Pavement Management PDF Download

The National Performance Management Measures; Assessing Pavement Condition for the National Highway Performance Program provided in Subpart C of 23 CFR Part 490 includes an alternative method to report pavement conditions for Interstate and non-Interstate National Highway System locations where the speed limit is less than 40 mph.(1) This alternate method uses present serviceability ratings (PSR) to report pavement condition in lieu of using the International Roughness Index, measures of rutting and faulting, and percentage of cracking where the posted speed limit is less than 40 mph. Per 23 CFR 490.309(b)(1)(iv), the portion of the Interstate mainline highway pavements where PSR is allowable includes border crossings and toll plazas.(1) To address stakeholder concerns about the appropriate application of PSR, the Federal Highway Administration (FHWA) developed resources to support agencies that prefer to use PSR as an alternate pavement-condition-rating system, where permitted. In addition, many agencies do not collect PSR on their pavement segments; instead, they use Pavement Condition Index (PCI) or other indices computed from measured surface distresses in their pavement management systems. In light of this, section 490.309(b)(2)(iii) also allows State DOTs to convert other pavement-condition-assessment methods (e.g., the U.S. Army Corps of Engineers PCI) to PSR if the State establishes to FHWA's satisfaction that the conversion produces pavement condition ratings equivalent to the PSR method. In support of this rule, FHWA has developed this report to provide an approach for estimating PSR from measured surface distress data. It also illustrates correlations between commonly used indices and the PSR, as described in the Highway Performance Monitoring System Field Manual.(3) The appendix includes a guide for using a Microsoft(R) Excel(R)-based PSR Computation Workbook that was developed to assists with estimating PSR from measured surface distresses.(2)