Robust Control And Filtering Of Singular Systems PDF Download

This dissertation, "Dissipative Control and Filtering of Singular Systems" by Zhiguang, Feng, 冯志光, was obtained from The University of Hong Kong (Pokfulam, Hong Kong) and is being sold pursuant to Creative Commons: Attribution 3.0 Hong Kong License. The content of this dissertation has not been altered in any way. We have altered the formatting in order to facilitate the ease of printing and reading of the dissertation. All rights not granted by the above license are retained by the author. Abstract: This thesis is concerned with the dissipative control and filtering problems of singular systems. Four classes of singular systems are considered: delay-free singular systems, singular systems with constant time-delay, uncertain singular systems with time-varying delay and sensor failures, and singular Markovian jump systems with actuator failures. For delay-free singular systems, the system augmentation approach is employed to study the dissipative control and filtering problems. First, the approach is used to solve the dissipative control problem by static output-feedback for standard state-space systems which are the special cases of singular systems. For a continuous-time standard state-space system, the closed-loop system is represented in an augmented system form. Based on the augmented system, a necessary and sufficient dissipativity condition is proposed, which decouples the Lyapunov matrix and controller matrix. To further separate the Lyapunov matrix and the system matrices, an equivalent condition is obtained by introducing some slack matrices. Then, a necessary and sufficient condition for the existence of a static output-feedback controller is proposed, and an iterative algorithm is given to solve the condition. For discrete-time singular systems, by giving an equivalent representation of the solution set, a necessary and sufficient dissipativity condition is proposed in terms of strict linear matrix inequality (LMI) which can be easily solved by standard commercial software. Then a state-feedback controller design method is given based on the augmentation system approach. The method is extended to the static output-feedback control problem and the reduced-order dissipative filtering problem. For continuous-time singular time-delay systems, the problem of state-feedback dissipative control is considered. An improved delay-dependent dissipativity condition in terms of LMIs is established by employing the delay-partitioning technique, which guarantees a singular system to be admissible and dissipative. Based on this, a delay-dependent sufficient condition for the existence of a state-feedback controller is proposed to guarantee the admissibility and dissipativity of the closed-loop system. In addition to delay-dependence, the obtained results are also dependent on the level of dissipativity. Moreover, the results obtained unify existing results on H∞ performance analysis and passivity analysis for singular systems. For discrete-time singular systems with polytopic uncertainties, time-varying delay and sensor failures, the problem of robust reliable dissipative filtering is considered. The filter is designed by the reciprocally convex approach such that the filtering error singular system is admissible and strictly (Q, S, R)-dissipative. For singular systems with time-varying delay and sensor failures, a sufficient condition of reliable dissipative analysis is obtained in terms of LMIs. Then the result is extended to the uncertain case by introducing some variables to decouple the Lyapunov matrices and the filtering error system matrices. Moreover, a desired filter for uncertain singular systems with time-varying delay and sensor failures is obtained by solving a set of LMIs. For continuous-time singular Markovian jump systems with actuator failures, the problem of reliable dissipative control is addressed. Attention is focused on the state-feedback controller design method such that