Production And Airworthiness Approvals Part Marking And Miscellaneous Amendments Us Federal Aviation Administration Regulation Faa 2018 Edition PDF Download

Harmonization of Airworthiness Standards-Miscellaneous Structures Requirements (US Federal Aviation Administration Regulation) (FAA) (2018 Edition) The Law Library presents the complete text of the Harmonization of Airworthiness Standards-Miscellaneous Structures Requirements (US Federal Aviation Administration Regulation) (FAA) (2018 Edition). Updated as of May 29, 2018 This final rule amends certain airworthiness regulations for transport category airplanes, based on recommendations from the FAA-sponsored Aviation Rulemaking Advisory Committee (ARAC). This amendment eliminates regulatory differences between the airworthiness standards of the FAA and the European Aviation Safety Agency (EASA). This final rule does not add new requirements beyond what manufacturers currently meet for EASA certification and does not affect current industry design practices. This final rule revises the structural test requirements necessary when analysis has not been found reliable; clarifies the quality control, inspection, and testing requirements for critical and non-critical castings; adds control system requirements that consider structural deflection and vibration loads; expands the fuel tank structural and system requirements regarding emergency landing conditions and landing gear failure conditions; adds a requirement that engine mount failure due to overload must not cause hazardous fuel spillage; and revises the inertia forces requirements for cargo compartments by removing the exclusion of compartments located below or forward of all occupants in the airplane. This book contains: - The complete text of the Harmonization of Airworthiness Standards-Miscellaneous Structures Requirements (US Federal Aviation Administration Regulation) (FAA) (2018 Edition) - A table of contents with the page number of each section