Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Joint Shear Behavior Of Reinforced Concrete Beam Column Connections Subjected To Seismic Lateral Loading PDF full book. Access full book title Joint Shear Behavior Of Reinforced Concrete Beam Column Connections Subjected To Seismic Lateral Loading.
| Author | : |
| Publisher | : |
| Total Pages | : |
| Release | : 2007 |
| Genre | : |
| ISBN | : |
| Author | : Firat Alemdar |
| Publisher | : |
| Total Pages | : 310 |
| Release | : 2007 |
| Genre | : Buildings |
| ISBN | : |
Abstract: Beam-column joints are one of the most critical elements of reinforced concrete moment resisting frames subjected to lateral seismic loading. The older reinforced concrete buildings designed before the introduction of modern seismic codes in the early 1970's, in general, do not meet the current design code requirements. In particular, the beam-column joints in such existing buildings do not have appropriate detailing which leads to insufficient lateral strength or ductility to withstand the effects of a severe earthquake loading. Therefore, evaluation of the lateral load carrying capacity of existing buildings for subsequent retrofit is very important for the safety of the buildings. The economical aspect should also be considered during the design of a structure which is only possible if the behavior of the structure during an earthquake can be predicted. The focus of this research is to evaluate the shear behavior of reinforced concrete beam-column joints and to develop a suitable model that would predict the lateral load carrying capacity. Previous experimental studies and results have shown that the shear strength of beam-column joints depends on several variables including concrete strength, axial load ratio, joint geometry joint transverse reinforcement ratio, and displacement ductility. However, the current codes include the effects of all of these parameters in beam-column joint design. Therefore, previous analytical research is examined and this information is used to develop a shear strength model. The proposed model is mainly based on the shear strength model for columns developed by Sezen and Moehle (2004). The proposed shear strength model is verified with experimental test results. Overall, the model did a reasonable job of predicting the shear strength of reinforced concrete beam-column joints. The proposed model provides a simply tool for the analysis of existing reinforced concrete buildings subjected to lateral loading and to determine the amount of remediation necessary for satisfactory seismic performance.
| Author | : Paul Robert Gefken |
| Publisher | : |
| Total Pages | : 350 |
| Release | : 1986 |
| Genre | : |
| ISBN | : |
| Author | : James Otis Jirsa |
| Publisher | : |
| Total Pages | : 546 |
| Release | : 1991 |
| Genre | : Architecture |
| ISBN | : |
| Author | : James Michael LaFave |
| Publisher | : |
| Total Pages | : 468 |
| Release | : 1997 |
| Genre | : Civil engineering |
| ISBN | : |
| Author | : Robert B. Lotus |
| Publisher | : |
| Total Pages | : 158 |
| Release | : 2011 |
| Genre | : |
| ISBN | : 9781124677545 |
Beam-column joint is considered a critical region in a structure when subjected to seismic load. Past earthquakes have shown that many of these structures behaved poorly and exhibited a combination of brittle failure at the joint and pullout of the beam longitudinal steel, leading to a rapid degradation of the joint and a precursor to a catastrophic collapse of a structure. Review of existing structures built prior to 1976 have determined concrete joints typically have little or no transverse reinforcement, discontinuous bottom beam reinforcement with insufficient embedment depth, and a common occurrence of column lap splice above the beam-column interface. Previous studies of rebar bond slip behavior, joint shear response, and joint interface - shear response were reviewed culminating in a study of various joint models simulating the behavior of deficient concrete beam-column joint subjected to a seismic load. An experimental test program consisting of three specimens was developed to test the behavior of deficient concrete beam-column joints. Specimen AB1 consists of deficient shear reinforcement at the joint, and will be tested to evaluate the behavior of a deficient reinforced concrete beam-column joint solely on insufficient shear reinforcement. Specimen AB2 is designed according to pre-1976 building standard and lacks sufficient rebar embedment of longitudinal beam reinforcement at the joint and has no shear reinforcement within the joint area. Specimen ACI318 is designed per the specifications of ACI 318-08, and will be used as the control specimen. Experimental results of the test program will eventually be applied as a baseline comparison to proposed state-of-the-art retrofit schemes aimed at enhancing the overall seismic performance of deficient reinforced concrete beam-column joints.
| Author | : Marvin E. Criswell |
| Publisher | : |
| Total Pages | : 434 |
| Release | : 1970 |
| Genre | : Columns, Concrete |
| ISBN | : |
The objectives of this investigation were to study the strength and behavior of slowly (statically) loaded reinforced concrete slab-column connections and to determine the effect of rapid (dynamic) loading on the strength and behavior by comparison with the static test results. Nineteen full-scale models of a connection and adjoining slab area, consisting of a simply supported slab 84 or 94 inches square and 6-1/2 inches thick loaded concentrically on a 10- or 20-inch-square stub column at the center of the slab, were tested. The main variables were the amounts of reinforcement in the slab (p = 0.75 and 1.50 percent), the column size, and the loading speed. Eight specimens were loaded to failure statically, two were subjected to a very rapidly applied load of short duration, and nine were loaded to failure by a rapidly applied load with a rise time chosen to represent the conditions in a blast-loaded structure. The static test results are compared with 12 shear strength prediction methods. Differences between the mechanism of shear failure in slabs and beams are examined. (Author).
| Author | : Stephen Paul Pessiki |
| Publisher | : |
| Total Pages | : 894 |
| Release | : 1990 |
| Genre | : Columns, Concrete |
| ISBN | : |
| Author | : M. A. Mansur |
| Publisher | : CRC Press |
| Total Pages | : 240 |
| Release | : 1999-01-29 |
| Genre | : Technology & Engineering |
| ISBN | : 9780849374357 |
This book compiles state-of-the-art information on the behavior, analysis, and design of concrete beams containing transverse openings. Discussions include the need, effects, and classification of openings as well as the general requirements for fulfilling design pure bending, combined bending, and shear - illustrated with numerical examples torsion alone or in combination with bending and shear large rectangular openings as well as opening size and location on beam behavior methods for analyzing ultimate strength and serviceability requirements effects of torsion in beams large openings in continuous beams and their effects on possible redistribution of internal forces as well as guidelines and procedures for the design of such beams effect of prestressing on the serviceability and strength of beams with web openings design against cracking at openings and ultimate loads Concrete Beams with Openings serves as an invaluable source of information for designers and practicing engineers, especially useful since little or no provision or guidelines are currently available in most building codes.
| Author | : Liande Zhang |
| Publisher | : |
| Total Pages | : 118 |
| Release | : 1982 |
| Genre | : Reinforced concrete |
| ISBN | : |
