Inverse Kinematics Problem In Robotics Using Neural Networks PDF Download

In order to overcome the drawbacks of some control schemes, which depends on modeling the system being controlled, and to overcome the problem of inverse kinematics which are mainly singularities and uncertainties in arm configuration. Artificial Neural Networks (ANN) technique has been utilized where learning is done iteratively based only on observation of input-output relationship. The proposed technique does not require any prior knowledge of the kinematics model of the system being controlled; the main idea of this approach is the use of an Artificial Neural Network to learn the robot system characteristics rather than having to specify an explicit robot system model. Since one of the most important problems in using Artificial Neural Networks, is the choice of the appropriate networks' configuration, two different networks' configurations were designed and tested, they were trained to learn desired set of joint angles positions from a given set of end effector positions. Experimental results have shown better response for the first configuration network in terms of precision and iteration. The developed approach possesses several distinct advantages; these advantages can be listed as follows :(First) system model does not have to be known at the time of the controller design, (Second) any change in the physical setup of the system such as the addition of a new tool would only involve training and will not require any major system software modifications, and (Third) this scheme would work well in a typical industrial set-up where the controller of a robot could be taught the handful of paths depending on the task assigned to that robot. The efficiency of the proposed algorithm is demonstrated through simulations of a general 6 D.G.F. serial robot manipulator.