Impact Of A Smoothness Incentive Disincentive On Hot Mix Asphalt Maintenance Resurfacing Costs PDF Download

Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Impact Of A Smoothness Incentive Disincentive On Hot Mix Asphalt Maintenance Resurfacing Costs PDF full book. Access full book title Impact Of A Smoothness Incentive Disincentive On Hot Mix Asphalt Maintenance Resurfacing Costs.

Impact of a Smoothness Incentive/disincentive on Hot-mix Asphalt Maintenance-resurfacing Costs

Impact of a Smoothness Incentive/disincentive on Hot-mix Asphalt Maintenance-resurfacing Costs
Author: Kevin K. McGhee
Publisher:
Total Pages: 40
Release: 2006
Genre: Pavements, Asphalt
ISBN:

Download Impact of a Smoothness Incentive/disincentive on Hot-mix Asphalt Maintenance-resurfacing Costs Book in PDF, ePub and Kindle

Smoothness, the absence of bumps and dips in the riding surface of a pavement, improves the quality of the ride and is believed to prolong the life of the pavement. This research addressed the impact of potential pay adjustments for smoothness on maintenance contract prices for hot-mix asphalt. In addition to the construction costs associated with potential incentives/disincentives for smoothness, the research examined the financial value of the resulting product (presumably smoother pavements). The analysis included maintenance cost savings for the owner/agency, as well as any reduction in delay and operating costs for the motoring public. A detailed statistical analysis of 5 years of Virginia's plant mix resurfacing schedules found no statistically definitive impact on bid price as a result of the Virginia Department of Transportation's (VDOT) special provision for rideability for asphalt pavements. A similar analysis on a more focused data set, however, did document a lifetime reduction in the International Roughness Index (IRI) of almost 9 in/mi. This reduction in roughness (increase in smoothness) implies an increase in pavement service life, which translates into reduced annual maintenance costs. Although the analysis supports as much as 7 years in additional functional life, an example calculation demonstrates that just a 2-year life extension will supply approximately $1,295 (about 6% of material costs) in owner/agency savings for every lane-mile of highway that is resurfaced under the special provision for rideability. If VDOT continues to employ the special provision with the frequency it has averaged over the past 4 years (1,033 lane-miles per year), using the special provision will save on the order of $1.3 million per year. The lifetime decrease in roughness can lead to even more dramatic user cost savings. One real example provided in the report demonstrates a fuel cost savings (for trucks alone) of $160,000 over a 10-year period for each lane mile of highway that is resurfaced under the special provision for rideability.


Introduction to Unmanned Aircraft Systems, Second Edition

Introduction to Unmanned Aircraft Systems, Second Edition
Author: Douglas M. Marshall
Publisher: CRC Press
Total Pages: 1944
Release: 2015-10-26
Genre: Political Science
ISBN: 113802693X

Download Introduction to Unmanned Aircraft Systems, Second Edition Book in PDF, ePub and Kindle

The proliferation of technological capability, miniaturization, and demand for aerial intelligence is pushing unmanned aerial systems (UAS) into the realm of a multi-billion dollar industry. This book surveys the UAS landscape from history to future applications. It discusses commercial applications, integration into the national airspace system (NAS), System function, operational procedures, safety concerns, and a host of other relevant topics. The book is dynamic and well-illustrated with separate sections for terminology and web- based resources for further information.


Optimal Incentive/Disincentive Determination Between Cost and Benefit

Optimal Incentive/Disincentive Determination Between Cost and Benefit
Author: Piyush Sharma
Publisher:
Total Pages:
Release: 2013
Genre:
ISBN:

Download Optimal Incentive/Disincentive Determination Between Cost and Benefit Book in PDF, ePub and Kindle

In an effort to motivate contractors to complete construction projects early on high-impact highway pavement construction projects, state transportation agencies (STAs) including TxDOT have often used incentive/disincentive (I/D) contracts. However, determining I/D rates is extremely difficult due largely to the lack of systematic methods for helping STAs determine effective I/D rates. The primary goal of this project is to develop a novel framework for determining the most realistic and economical I/D dollar amounts for high-impact highway improvement projects. To achieve its goal, this project proposes an integration analysis including project schedule and the lower and upper bounds of the I/D contract. The lower bound is the contractor's additional cost of acceleration, and the upper is the total savings to road users and to the agency. The study data were gathered using Construction Analysis for Pavement Rehabilitation Strategies (CA4PRS) software. These data were then grouped by four different types of pavements, namely Joint Plain Concrete Pavement (JPCP), Continuously Reinforced Concrete Pavement (CRCP), Hot Mix Asphalt (HMA), and Milling and Asphalt Concrete Overlay (MACO). With these data, a series of regression analyses were carried out to develop predictive models for the validation of time-cost tradeoff to determine I/D lower bound. Road user cost and agency cost savings were quantified using CA4PRS to develop lookup tables to determine I/D upper bound. Adjustment of contractors' additional cost of acceleration with Level of Service (LOS) and total savings adjustment using Net Present Value (NPV) were incorporated in the research study to calculate point based estimates of I/D for lower and upper bound, respectively. Lastly, case studies on real world projects were conducted to evaluate robustness of the model. The research results reveal that the predictive models give appropriate results for the case studies in determining the I/D dollar amount for the lower and upper bound. This study will provide the research community with the first view and systematic estimation method that STAs can use to determine the most economical and realistic I/D dollar amount for a given project- an optimal value that allows the agency to stay within budget while effectively motivating contractors to complete projects ahead of schedule. It will also significantly reduce the agency's expenses in the time and effort required for determining I/D dollar amounts. The electronic version of this dissertation is accessible from http://hdl.handle.net/1969.1/151087


Synthesis of Benefits and Costs of Alternative Lane Marking Strategies

Synthesis of Benefits and Costs of Alternative Lane Marking Strategies
Author: Michael D. Fontaine
Publisher:
Total Pages: 70
Release: 2009
Genre: Road markings
ISBN:

Download Synthesis of Benefits and Costs of Alternative Lane Marking Strategies Book in PDF, ePub and Kindle

The Virginia Department of Transportation (VDOT) currently uses snowplowable raised pavement markers (SRPMs) to supplement longitudinal pavement markings on some facilities. SRPMs are much more visible than traditional longitudinal markings under wet, nighttime conditions. SRPMs have been reported to dislodge from pavement, however, which has raised the question as to whether alternative marking materials might be able to replace SRPMs. The purpose of this study was to investigate the visibility performance of longitudinal pavement marking materials currently on the market. The specific objectives of this study were (1) to determine whether or not new pavement marking materials could be used in place of SRPMs; (2) if SRPMs were to be used, to develop guidelines for their installation and maintenance; and (3) to determine the costs and benefits of using SRPMs to the maximum extent possible. No new data on the visibility or durability of pavement marking materials were collected for this study. The study primarily synthesized existing research on the characteristics of different marking materials and then applied information derived from the synthesis to Virginia-specific data to estimate the impacts of using different materials. National practices for installing, inspecting, and maintaining SRPMs were also reviewed. The results of the literature review indicated that SRPMs remain the only marking system that provides sufficient nighttime preview time at high speeds, especially under wet conditions. Further, SRPMs can improve safety in certain situations, but they can also degrade safety in other situations since drivers may travel at higher speeds when the distance they can see down the road at night increases. Proposed guidelines for the installation and maintenance of SRPMs were developed. They recommend that SRPMs be installed on all limited access freeways, on all two-lane roads with an average daily traffic volume above 15,000 vehicles per day, and on all roads with a posted speed limit of 60 mph or greater. Several other situations where SRPMs might be installed based on engineering judgment were also identified. A proposed maintenance schedule that requires inspections every 2 to 3 years was also developed. A conservative economic analysis indicated that the benefits of installing and maintaining SRPMs using the guidelines developed in this study outweighed the costs by more than 80 to 1, based purely on potential safety improvements on road geometries where SRPMs have been shown to improve safety. Further, VDOT can realize cost savings by discontinuing SRPM usage on low-volume facilities and by revising particular SRPM standards.


Evaluation of Jointed Reinforced Concrete Pavement Rehabilitation on I-64 in the Richmond and Hampton Roads Districts of Virginia

Evaluation of Jointed Reinforced Concrete Pavement Rehabilitation on I-64 in the Richmond and Hampton Roads Districts of Virginia
Author: Brian K. Diefenderfer
Publisher:
Total Pages: 52
Release: 2009
Genre: Interstate 64
ISBN:

Download Evaluation of Jointed Reinforced Concrete Pavement Rehabilitation on I-64 in the Richmond and Hampton Roads Districts of Virginia Book in PDF, ePub and Kindle

Beginning in 2004, the Virginia Department of Transportation (VDOT) undertook a series of pavement rehabilitation projects to address deficiencies in three sections of the I-64 corridor between Richmond and Newport News. I-64 serves as the primary avenue between the Richmond and Hampton Roads metropolitan areas and carries a combined traffic volume ranging from approximately 20,000 to 90,000 vehicles per day. For nearly 100 mi, this roadway is a four-lane divided facility that was originally built between the late 1960s and early 1970s as either a jointed reinforced or continuously reinforced concrete pavement. The existing concrete pavement was rehabilitated using three rehabilitation procedures: two standard approaches and an experimental approach. The standard rehabilitation procedures included the use of full-depth portland cement concrete (PCC) patches overlaid by a hot-mix asphalt (HMA) overlay and full-depth PCC patches followed by grinding of the pavement surface. The experimental rehabilitation procedure consisted of the use of full- and partial-depth HMA patches followed by an HMA overlay. The purpose of this study was to document the initial condition and performance to date of the I-64 project and to summarize similar work performed by state departments of transportation other than VDOT. The pavement rehabilitation cost per lane-mile was nearly 20% less for the section of I-64 for which full-depth PCC patches followed by grinding of the pavement surface was used than for the other two sections. However, the experimental results do not allow for a comparison to determine any differences in the structural capacity or service life between the sections. The study recommends that VDOT's Materials Division annually monitor the ride quality of the pavement in the three rehabilitated sections of I-64 so that the end of service life can be defined as the pavement roughness increases because of deterioration. Further, the Virginia Transportation Research Council should collaborate with other research organizations to encourage and pursue full-scale or laboratory-scale accelerated pavement testing to determine the optimum repair materials and methods for pre-overlay repair of existing PCC pavements and to develop models to quantify the deterioration of an asphalt overlay placed over an existing concrete pavement because of reflection cracking.


Impact of New Asphalt Technologies on Pavement Life-Cycle Costing in Ontario

Impact of New Asphalt Technologies on Pavement Life-Cycle Costing in Ontario
Author:
Publisher:
Total Pages: 20
Release: 2002
Genre:
ISBN:

Download Impact of New Asphalt Technologies on Pavement Life-Cycle Costing in Ontario Book in PDF, ePub and Kindle

Life-cycle cost analysis is an effective decision-making tool for pavement designers and highway agencies. Given adequate historical data on asphalt performance and the use of rational pavement design methods, the designer can readily determine which pavement design alternative is the most cost-effective for the particular location. The use of high-performance, premium materials and new, enhanced technologies in asphalt pavement construction provide benefits to the roadway owner and user when their costs are considered over the increased service life of the pavement. The implementation of timely, systematic asphalt pavement maintenance and rehabilitation enhances the use of these materials and methods and improves their overall cost-effectiveness. Life-cycle cost analyses indicate that improvements in pavement smoothness, quality control through end-result specifications and use of high quality materials such as performance graded asphalt cement, heavy duty binder course and stone mastic asphalt mixes substantially reduce the overall life-cycle costs of the asphalt pavement. This is particularly evident for higher volume roads and when user costs such as delay are considered. The elements of pavement life-cycle cost analysis, design considerations and the impact of hot-mix asphalt materials and technology advancements made in Ontario over the last 10 to 15 years are presented. For the covering abstract of this conference see ITRD number E211271.


Superpave Mix Design

Superpave Mix Design
Author: Asphalt Institute
Publisher:
Total Pages: 102
Release: 2001-01-01
Genre: Asphalt
ISBN: 9781934154175

Download Superpave Mix Design Book in PDF, ePub and Kindle


AASHTO Guide for Design of Pavement Structures, 1993

AASHTO Guide for Design of Pavement Structures, 1993
Author: American Association of State Highway and Transportation Officials
Publisher: AASHTO
Total Pages: 622
Release: 1993
Genre: Pavements
ISBN: 1560510552

Download AASHTO Guide for Design of Pavement Structures, 1993 Book in PDF, ePub and Kindle

Design related project level pavement management - Economic evaluation of alternative pavement design strategies - Reliability / - Pavement design procedures for new construction or reconstruction : Design requirements - Highway pavement structural design - Low-volume road design / - Pavement design procedures for rehabilitation of existing pavements : Rehabilitation concepts - Guides for field data collection - Rehabilitation methods other than overlay - Rehabilitation methods with overlays / - Mechanistic-empirical design procedures.


Concrete Pavement Rehabilitation

Concrete Pavement Rehabilitation
Author:
Publisher:
Total Pages: 28
Release: 1997
Genre: Dowels
ISBN:

Download Concrete Pavement Rehabilitation Book in PDF, ePub and Kindle

Load transfer restoration (LTR) is a rehabilitation technique for increasing the load transfer capability of existing jointed portland cement concrete pavement by placement of dowel bars or other mechanical devices across joints and/or cracks that exhibit poor load transfer.