Grafting And Budding PDF Download

This historic book may have numerous typos and missing text. Purchasers can usually download a free scanned copy of the original book (without typos) from the publisher. Not indexed. Not illustrated. 1878 edition. Excerpt: ...slipped! Grafting with a Cutting for the Scion. In this method the scion only is a cutting, the stock is a tree which has been at least a year planted. It may be left entire or headed down at the time of grafting: and may be grafted either close to the ground or at some distance from it, under the surface of the soil or above it. Cutting-Grafting on a Low Stem. There are two principal methods based on the previous wnputation of the stem or otherwise. Here the stock is shortened to within 4 inches or 8 inches from the neck. We then take a scion-branch of sufficient length that when its extremity is buried in the soil as a cutting, close to the stock, it may be grafted on the stock, and have a couple of buds above the graft. The stock is channelled with the gouge and the bark is removed from that part of the scion which is to be placed in the groove. They are then bandaged and covered with mastic. When a vine is grafted in this way, the soil is heaped up about it so as to cover the graft. When the stem of the vine is young, or if it is furnished with vigorous shoots at the base, we have recourse to layer-grafting. A small trench or hole is made (B), in which the shoot is to be layered; the shoot to be grafted is then cut down to the third Layer-Grafting, eye (as at A). The other shoots of the same stock are removed, or cut short or grafted in the same way. The scion is grafted at A in the English fashion, then cut so as to leave two or three eyes over-ground, and fastened to a stake. Should the stock offer any resistance it can be pegged down in the bottom of the trench with a forked stick. The hole or trench (B) should then be filled with good free soil, which will facilitate the production of the new roots. Instead of previously...