Get Cast PDF Download

Surface Tension Forces in Gas Pressurized VDC Casting 195 P.W. Baker and J.F. Grandfield A Total Business Cost Approach 205 Brett T. Aisen and Lachlan J. Massey Optimising Pit Recoveries on 6XXX Extrusion Billet 213 David Latter CAST HOUSE SAFETY Casthouse Safety in 2001 223 John E. Jacoby Improving Safety Performance in an Aluminium Casthouse 233 Barry Taylor CONTINUOUS CASTING An Assessment of the Design of a Gautschi Mould Using Finite Element Analysis 247 Philip Clausen and Geoff Whan Horizontal Direct Chilled (HDC) Casting Technology for Aluminium and Requirements to Metal Cleanliness 253 Franz Niedermair Aspects of Heat Transfer During Production of Remelt Ingot Using Chain Casters 263 J.F. Grandfield, T.T. Nguyen, G. Redden and J.A. Taylor Twin-Belt Casting Technology Update (abstract only) 273 W. Szczypiorski Improving Horizontal Direct Chill Casting 275 Ali A. Dawood HEAT TREATMENT Effect of Homogenisation Temperature and Time on Billet Microstructure and Extruded Properties of Alloy 6061 287 M.J. Couper, M. Cooksey and B. Rinderer Effect of Homogenization on Small Diameter Billets - An Extruder's Experience 297 Hua-Tian Tan and Callistus Hing-Chih Lee Control of Wire Rod Physical Properties Like Ultimate Tensile Strength and Elongation by Close Monitoring of Rolling Energy Input 305 S.D. Chouharia, P.S. Gambhir and M. Dash MAGNESIUM CASTING Aluminium and Magnesium: Equipment and Process Comparison 319 Paul McGlade and Nigel Ricketts RECYCLING Recycling of Contaminated Aluminium Scrap - A Responsible Approach 331 Richard J. Evans REFRACTORY Cast House Refractories - Selection & Evaluation 343 Robert C. Flann PROCESS CONTROL Advances in On-Site Alloy Analysis and Identification (abstract only) 357 Keith Watson Automation Primer for Supervisors and Operators 359 Peter R. Whiteley Author