Field Applications Of In Situ Remediation Technologies PDF Download

Approximately 85% of the hazardous waste sites in the United States have contaminated ground water. The conventional approach for remediating contaminated ground water has been to extract the contaminated water, treat it above ground, and reinject or discharge the clean water ("pump- and-treat"). The recovered contaminants must be disposed of separately. It is becoming increasingly apparent that pump-and-treat technologies require considerable investment over extended period of time, and often times do not actually clean up the source of the contamination. Current policies and law stress "permanent" remedies over containment. Consequently, there is considerable interest and effort being expended on alternative, innovative treatment technologies for contaminated ground water. This report is one in a series that document recent pilot demonstrations and full-scale applications that either treat soil and ground water in place or increase the solubility and mobility of contaminants to improve their removal by other remediation technologies. It is hoped that this information will allow more regular consideration of new, less costly, and more effective technologies to address the problems associated with hazardous waste sites and petroleum.