Experimental Performance Of Reinforced Concrete Bridge Columns With Renewable Hinges Subjected To Seismic Excitation PDF Download

Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Experimental Performance Of Reinforced Concrete Bridge Columns With Renewable Hinges Subjected To Seismic Excitation PDF full book. Access full book title Experimental Performance Of Reinforced Concrete Bridge Columns With Renewable Hinges Subjected To Seismic Excitation.

Performance of Circular Reinforced Concrete Bridge Columns Under Bidirectional Earthquake Loading

Performance of Circular Reinforced Concrete Bridge Columns Under Bidirectional Earthquake Loading
Author: Mahmoud M. Hachem
Publisher:
Total Pages: 496
Release: 2003
Genre: Bridges, Concrete
ISBN:

Download Performance of Circular Reinforced Concrete Bridge Columns Under Bidirectional Earthquake Loading Book in PDF, ePub and Kindle

Describes the dynamic testing of 4 circular reinforced concrete bridge columns. The specimens were divided into 2 pairs, with each pair subjected to a different ground motion. Within each pair, one specimen was subjected to one component of the ground motion, while the other was subjected to 2 components. Two analytical studies were carried out for a wide array of column heights, diameters, and axial load intensities. The columns were subjected to large suites of ground motions scaled to match on average the design response spectrum.


Seismic Performance of Reinforced Concrete Bridges Allowed to Uplift During Multi-Directional Excitation

Seismic Performance of Reinforced Concrete Bridges Allowed to Uplift During Multi-Directional Excitation
Author: Andres Oscar Espinoza
Publisher:
Total Pages: 666
Release: 2011
Genre:
ISBN:

Download Seismic Performance of Reinforced Concrete Bridges Allowed to Uplift During Multi-Directional Excitation Book in PDF, ePub and Kindle

Abstract Seismic Performance of Reinforced Concrete Bridges Allowed to Uplift During Multi-Directional Excitation by Andres Oscar Espinoza Doctor of Philosophy in Engineering - Civil and Environmental Engineering University of California, Berkeley Professor Stephen A. Mahin, Chair The behavior of bridges subjected to recent moderate and large earthquakes has led to bridge design detailed for better seismic performance, particularly through wider bridge foundations to handle larger expected design forces. Foundation uplift, which is not employed in conventional bridge design, has been identified as an important mechanism, in conjunction with structural yielding and soil-structure interaction that may dissipate energy during earthquakes. Preventing uplift through wider foundations looks past the technical and economical feasibility of allowing foundation uplift during seismic events. The research presented in this thesis is part of a larger experimental and analytical investigation to develop and validate design methods for bridge piers on shallow foundations allowed to uplift during seismic events. Several analytical and some experimental studies have been performed to assess rocking and or uplift of shallow foundation systems, however they have evaluated systems with a limited range of footing dimensions and seismic excitations. As such, there is an uncertainty in the information needed to base a performance evaluation and develop design methods. The purpose of this study is to investigate, through experimental and analytical studies, the seismic performance of uplifting bridge piers on shallow foundations when considering different ground motions and footing dimensions. As well as to identify key differences in performance evaluation criteria for conventional and uplifting bridge pier systems. The experimental study dynamically tested a single reinforced concrete bridge column specimen with three adjustable footing configurations grouped by footing dimension, and tested for various combinations of one, two, and three components of seismic excitation. Groups one and two evaluated uplifting systems where the column was limited to elastic loading levels while group three considered inelastic column loading levels. All test groups remained stable and exhibited some rocking and or uplift during testing. Analytical models were developed and validated using the experimental testing results to predict local and global footing and column response. Reliable estimates of forces and displacements during elastic and inelastic response were achieved. To assess the seismic performance of a range of bridge pier systems allowed to uplift a parametric investigation using the validated analytical models was performed in which the column was modeled per conventional design criteria to ensure adequate strength and flexural ductility. The parameters varied include footing width, ground motion excitation, and elastic or inelastic column response. Response of the uplifting bridge pier systems was found to be sensitive to the structural periods, magnitude of excitation, and footing width.


Preliminary Seismic Analysis and Design of Reinforced Concrete Bridge Columns for Curved Bridge Experiments

Preliminary Seismic Analysis and Design of Reinforced Concrete Bridge Columns for Curved Bridge Experiments
Author: Nathan W. Harrison
Publisher:
Total Pages: 542
Release: 2011
Genre: Columns
ISBN: 9781124682358

Download Preliminary Seismic Analysis and Design of Reinforced Concrete Bridge Columns for Curved Bridge Experiments Book in PDF, ePub and Kindle

As part of a Federal Highway Administration (FHWA) sponsored research project to study highway system resilience, a 40 percent scale curved steel plate girder bridge is to be constructed and subjected to earthquake simulation at the Large Scale Structures Laboratory on the University of Nevada, Reno (UNR) campus. The 145 foot long bridge model is to have three-spans, supported on two single-column bents with hammer-head pier caps, and have a subtended angle of 104°. The purpose of the shake table testing is to study the seismic system behavior of the bridge as well as additional bridge components including; conventional columns, isolation, ductile-cross frames, abutment behavior, and the seismic behavior of bridges including the effects of live load. Ultimately design recommendations will be developed from this research. The research presented in this document is the results of preliminary analysis and design of conventional reinforced concrete bridge columns and substructure elements as part of the larger project to examine global seismic behavior of the scaled bridge model. In order to prepare for seismic testing of the scaled bridge model, extensive pre-experimental numerical analysis was performed. Finite element models were developed using SAP2000 and non-linear time-history analysis was performed to investigate the seismic response of the bridge model. Analytical bridge models were analyzed using both 16-inch and 20-inch column diameters and various abutment support conditions. The models were subjected to two levels of horizontal bidirectional earthquake excitation representing a design level earthquake and a large amplitude earthquake intended to cause column failure. Using the results from the analysis, preliminary construction plans were prepared for one set of columns and the adjacent substructure components using the provisions from the AASHTO Guide Specifications for LRFD Seismic Bridge Design. In addition to the investigation into column performance, a parametric study was performed to determine axial response of the bearings at both the abutments and piers when subjected to seismic loading. The numerical analysis showed that system effects due to superstructure-substructure interaction can cause column flexural response that is typically not observed with stand-alone column tests. The effects of bridge horizontal curvature was shown to have a significant impact on the axial performance of the bearings in which the response was not uniform for all bearing at one support location. As a component of the analysis and design, two strut-and-tie models were developed to provide adequate joint detailing in order to ensure capacity protection of the column-to-bentcap connection under multiple cycles of seismic loading.