Conceptual Design For The Space Station Freedom Fluid Physics Dynamics Facility PDF Download

This report documents the conceptual design study performed to evaluate design options for a subscale dynamic test model which could be used to investigate the expected on-orbit structural dynamic characteristics of the Space Station Freedom early build configurations. The baseline option was a 'near-replica' model of the SSF SC-7 pre-integrated truss configuration. The approach used to develop conceptual design options involved three sets of studies: evaluation of the full-scale design and analysis databases, conducting scale factor trade studies, and performing design sensitivity studies. The scale factor trade study was conducted to develop a fundamental understanding of the key scaling parameters that drive design, performance and cost of a SSF dynamic scale model. Four scale model options were estimated: 1/4, 1/5, 1/7, and 1/10 scale. Prototype hardware was fabricated to assess producibility issues. Based on the results of the study, a 1/4-scale size is recommended based on the increased model fidelity associated with a larger scale factor. A design sensitivity study was performed to identify critical hardware component properties that drive dynamic performance. A total of 118 component properties were identified which require high-fidelity replication. Lower fidelity dynamic similarity scaling can be used for non-critical components. Davis, D. A. and Gronet, M. J. and Tan, M. K. and Thorne, J. Unspecified Center DESIGN ANALYSIS; DYNAMIC CHARACTERISTICS; DYNAMIC MODELS; SCALE MODELS; SPACE STATION FREEDOM; SPACECRAFT DESIGN; DYNAMIC TESTS; SPACECRAFT CONFIGURATIONS; TRUSSES...