Feasibility And Design Of Solar Powered Electrodialysis Systems For Agriculture Applications PDF Download

Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Feasibility And Design Of Solar Powered Electrodialysis Systems For Agriculture Applications PDF full book. Access full book title Feasibility And Design Of Solar Powered Electrodialysis Systems For Agriculture Applications.

Feasibility and Design of Solar-powered Electrodialysis Systems for Agriculture Applications

Feasibility and Design of Solar-powered Electrodialysis Systems for Agriculture Applications
Author: Jacob Nathaniel Easley
Publisher:
Total Pages: 0
Release: 2022
Genre:
ISBN:

Download Feasibility and Design of Solar-powered Electrodialysis Systems for Agriculture Applications Book in PDF, ePub and Kindle

This paper presents photovoltaic-powered electrodialysis reversal (PV-EDR) as a promising desalination technology for agricultural applications in the Middle East and North Africa (MENA). Water scarcity in MENA has led to reliance on brackish water for irrigation of crops. Irrigating crops with high salinity water causes a host of problems including decreased yield and soil degradation. Current solutions are water and energy intensive, leading to overextraction of renewable water resources as well as overreliance on fossil fuels for electricity, which is expensive. Market research in MENA and interviews conducted with farmers in Jordan led to the conclusion that energy cost is the most significant issue facing small-scale desalination systems for agriculture in MENA. PV-EDR is chosen as an ideal desalination architecture to meet the needs of farmers by reducing energy costs compared to on-grid reverse osmosis (RO) systems that are currently employed in MENA. Time-variant (TV) operational theory for PV-EDR is presented, which allows for desalination production to match the available solar irradiance throughout a day, leading to decreased power system sizing and further cost savings. TV-PV-EDR can be integrated with water-and energy-efficient drip irrigation systems in order to tailor desalination production to crop water demand throughout a season. Given a case study in Jordan, a TV-PV-EDR system is designed and compared to current benchmark RO systems in relation to capital cost, energy cost, and total lifetime cost. TV-PV-EDR was found to be less expensive and more energy efficient than RO systems over its lifetime despite having a larger capital cost. TV-PV-EDR has the potential to provide a mechanism through which more energy-efficient, higher recovery desalination for agriculture can be achieved.


Solar Energy Update

Solar Energy Update
Author:
Publisher:
Total Pages: 688
Release: 1981
Genre: Solar energy
ISBN:

Download Solar Energy Update Book in PDF, ePub and Kindle


Solar Powered Electrodialysis

Solar Powered Electrodialysis
Author: United States. Office of Water Research and Technology
Publisher:
Total Pages: 322
Release: 1979
Genre: Photovoltaic power generation
ISBN:

Download Solar Powered Electrodialysis Book in PDF, ePub and Kindle


Solar-powered Electrodialysis

Solar-powered Electrodialysis
Author: J. E. Lundstrom
Publisher:
Total Pages: 214
Release: 1983
Genre: Photovoltaic power generation
ISBN:

Download Solar-powered Electrodialysis Book in PDF, ePub and Kindle


Cost Optimization of a Solar-powered Electrodialysis Desalination System

Cost Optimization of a Solar-powered Electrodialysis Desalination System
Author: Sterling Marina Watson
Publisher:
Total Pages: 83
Release: 2017
Genre:
ISBN:

Download Cost Optimization of a Solar-powered Electrodialysis Desalination System Book in PDF, ePub and Kindle

With their autonomous operation and low environmental impact, solar photovoltaics (PV) are an attractive power source for off-grid systems. One application of PV is for powering village-scale desalination systems, which are needed in regions with a saline drinking water supply and an unreliable electric grid. However, the intermittent and non-dispatchable nature of solar energy is not well-suited to conventional loads that are designed to operate off of a steady electrical grid, so it is important to design and optimize PV-powered systems such that they are persistent, reliable, predictable, and low-cost. In this thesis, I present a solar photovoltaic-powered electrodialysis reversal (PV-EDR) model, and use it to design a steady voltage and pumping EDR system composed of current off-the- shelf parts for Chelluru, a village near Hyderabad, India. I investigate flexible operation and load sizing as design approaches for low-cost PV-powered systems, and apply these concepts to a theoretical reference system and the PV-EDR system. I also present the results of a 7-day field test of the PV-EDR system in Chelluru. Through a sensitivity analysis performed with the PV-EDR model, I found that easing the output reliability constraint for the PV-EDR system from 100% to 98% reduced the system capital cost by 5.7%, indicating that usage of alternative water supplies during brief and infrequent periods of low sunshine could be a cost-effective way of supplementing PV-EDR if constant water production is required year-round. I found that the capital cost of the PV-EDR system was highly sensitive to the cost of the PV-EDR membranes, and foreseeable membrane cost reductions of 87% could reduce the cost of the total system by 50%. This observation was reaffirmed through an analysis of the effect of flexible operation and load sizing for PV-powered systems, which revealed that if the electrical load can be designed to operate primarily during the sunny hours of the day (as would be the case for a larger EDR unit enabled by inexpensive membranes), the PV and batteries could be downsized compared to a system that operates through the night. The PV-EDR model presented in this thesis was found to predict the operation of the installed system within 13% for the 7-day village test. This model can be adapted to other PVpowered systems to aid in design and cost optimization, and its accuracy will be further improved through additional testing and improved PV and battery device models. The flexible operation and load sizing design approaches detailed in this thesis will be useful for informing the design of any PV-powered system with accumulable output.


Performance and Economics of Monovalent Selective Electrodialysis Desalination for Irrigation

Performance and Economics of Monovalent Selective Electrodialysis Desalination for Irrigation
Author: Yvana Damiella Ahdab
Publisher:
Total Pages: 276
Release: 2021
Genre:
ISBN:

Download Performance and Economics of Monovalent Selective Electrodialysis Desalination for Irrigation Book in PDF, ePub and Kindle

Reverse osmosis (RO) is the most widely used desalination technology for the treatment of irrigation source water and wastewater. Brackish groundwater, seawater, and agricultural effluent often contain both monovalent ions damaging to crops (Na+, Cl−) and divalent ions beneficial for crops (Ca2+, Mg2+, SO2−4). RO removes both types of ions. These beneficial ions must then be reintroduced to the desalinated water through the addition of fertilizer. Monovalent selective electrodialysis (MSED) demonstrates greater potential to align with the needs of the agriculture sector. MSED is a variant of conventional electrodialysis (ED). MSED preferentially removes monovalent ions relative to multi-valent ions, defined as monovalent selectivity, via selective ion-exchange membranes. MSED operates at a significantly higher water recovery than RO. In the treatment of irrigation source water, MSED's selective removal may reduce fertilizer requirements and associated costs, while its greater recovery saves water and decreases the volume of brine for disposal. In the treatment of agricultural wastewater, MSED's selective removal of sodium, the biggest barrier to water reuse, may help greenhouses achieve minimal liquid discharge. Despite the possible economic and environmental benefits of MSED, the technology has not been commercially employed for the treatment of agricultural water. Rather, it has historically been used to concentrate sodium chloride from seawater brine for salt production. Consequently, the literature has focused on characterizing and designing MSED systems almost exclusively for high salinity applications. Because water composition greatly influences membrane behavior, separate analyses must be conducted to determine how MSED will perform for lower salinity applications relevant to agriculture. This thesis investigates the membrane performance, energetics, and economics of MSED for the treatment of irrigation source water and wastewater. Experiments are conducted on two types of MSED membranes, one of which has never been tested in the literature, to characterize the following system parameters as a function of feedwater composition: monovalent selectivity, ion transport, membrane resistance, membrane permeability, and limiting current density. Feedwaters used in the present MSED experiments simulate seawater and numerous compositions of brackish groundwater and agricultural effluent, which often vary with location. We find that both MSED membranes demonstrate notable monovalent selectivity for all tested feedwaters, although the selectivity varies with ionic composition and salinity. The experimentally-determined system parameters then serve as inputs to our MSED cost model. This model evaluates fertilizer and water savings as a function of farm size for the different feedwaters and membranes. These savings are weighed against the greater capital and operating costs of MSED relative to RO, in order determine the feasibility of MSED adoption for irrigation. While the energy consumption of MSED is comparable to that of RO for the treatment of brackish water and wastewater, MSED requires significantly more energy to desalinate seawater. Solar powered, in addition to conventionally powered, desalination is integrated into the cost model for seawater. The insights described in this thesis suggest that MSED may be the future of desalination for agriculture, particularly for brackish water and wastewater treatment.


Design of Cost-optimized Village-scale Electrodialysis Systems for Brackish Water Desalination

Design of Cost-optimized Village-scale Electrodialysis Systems for Brackish Water Desalination
Author: Natasha Catherine Wright
Publisher:
Total Pages: 156
Release: 2018
Genre:
ISBN:

Download Design of Cost-optimized Village-scale Electrodialysis Systems for Brackish Water Desalination Book in PDF, ePub and Kindle

This thesis proposes methods of reducing the cost of electrodialysis brackish water desalination systems, specifically for use in rural India, where 60% of the groundwater is too saline to drink. Convergence of socioeconomic and technical factors led to the insight that photovoltaic (PV) powered electrodialysis (ED) has the potential for impact in rural water treatment. In order to design a system that can meet the necessary production requirements, a robust parametric model was created to predict the desalination rate, limiting current density, and total energy use in an ED system. The model agrees with experimental measurements across two diverse ED stack designs, differing in total membrane area, membrane manufacturers, and flow channel spacers. A commercial-scale ED stack was additionally tested in Chelluru, India, building confidence that the model is predictive for real groundwater, and that ED systems are feasible to operate in the rural Indian context. The ED model was used within an optimization routine to determine the lowest cost operating mode and stack design, assuming existing, flat-stack architectures. Common operating modes including constant-voltage batch and multi-stage continuous systems were considered alongside novel operation modes including voltage-regulated batch and hybrid batch-continuous systems. For the production and desalination rates required for a village-scale application, a voltage-regulated hybrid system that is fully optimized for membrane width, length, and channel thickness reduces the 10-year total cost and capital cost of the system by 37% and 47%, respectively, in comparison to a commercially available stack optimized under the same operation modes. While matching of applied and limiting current densities can be achieved using a voltage-regulated batch operation (minimizing stack cost), this requires a potentially costly DC power supply and control system. The final part of the thesis proposes a spiral ED stack architecture that allows for matching through the geometry of the stack alone. Both a standard Archimedean spiral and an ideal irregular spiral shape are presented. The ideal spiral shape would reduce the 10-year total cost and capital cost by 21% and 39%, respectively, in comparison to the Archimedean spiral, and is cost-competitive with a hybrid voltage-regulated flat-stack design.